 |
 |
 |
 |
 |
 |
 |
 |
| • 5-1002 MHz Bandwidth | • Easy Interchangeable 2/4/8 port Faceplates |
| • 12 Amp Current Capacity | • Compliant with SCTE Guidelines |
| • Blocking Capacitors on the "F" ports for extended Surge Resistant | • Printed Circuit Boards |
| • Aluminum Alloy Housing used for Corrosion Resistance | • (PIM) Equalizable Tap Options Available (see tab) |
| • Weather Rubber Gasket and RFI Shielding Gasket | |
| • Epoxy Sealed and Nickel Plated Brass "F" ports | |
| • Rotational Seizure Mechanism for Aerial or Pedestal Installation | |
| • Power Passing Option: CB: Continuous through Signal w/o Faceplate | |
 |
|
*Product specifications are subject to change without notice.
 |
 |
|
| *8-port, 55 PIM Series shown above. | ||
| PIM (Plug-In Module) Conditioning Tap Options | DTxxG - SR - CB - PIM - xxx | |
 |
Cable Simulator (PIM-CS-xx)– Maintains Low Loss in the Return Drop Path, while attenuating the Forward Drop Signals to the proper System Levels (3, 6, 9, 12 dB Values) |
 |
Cable Equalizer (PIM-EQ-xx)– Attenuates the Return Path Signal from the Customer Premise, thereby reducing the effects of system ingress. In addition, tightens the window of return path signal variation allowing for more efficient operation of an optical nodes return transmitter. (2, 4, 6, 8, 10, 12, 14, 16 dB Values) |
 |
Return Path Attenuator (PIM-RPA-xx)– Similar to PIM-EQ, except is split dependent and provides less impact on the Forward Drop Signal. (2, 4, 6, 8, 10, 12, 14, 16, 18 dB Values) |
 |
Forward Path Attenuator (PIM-FPA-xx)– Similar to the PIM-EQ except it is split dependent and provides less impact on the Forward Drop Signal (3,6,9,12,15 dB Values) |
 |
PIM-JP |
|
High Pass Plug In (PIM-HP-52)– Similar to PIM-RPA except attenuates the Return Path even greater. (52dB Value) |
| Click on a Link to Download more Information on this specific product. | |
| Specification Sheet | 66 Series Outdoor Taps |  |
| Specification Sheet | PIM Features | |
